Release Notes

Introduction

The AlazarTech SDK allows you to create applications that configure and acquire data from AlazarTech PCI/PCIe digitizer boards using functions exported by AlazarTech device drivers. It includes: a programmer's guide and reference manual, header and library files, and sample code. Installation The ATS-SDK for Windows requires a PC running 32- or 64-bit versions of Windows 2000 or later with about 40 MB of free disk space.

To install the ATS-SDK, double-click on the ATS-SDK setup program and follow its instructions. By default, the setup program creates a directory named "C:\AlazarTech\ATS-SDK<Version>", and installs all ATS-SDK files to this directory.

To uninstall the ATS-SDK, open the "Add and Remove Programs" Control Panel applet, select the ATS-SDK, and click on the "Uninstall" button.

Sample programs

The ATS-SDK for Windows includes sample code for the following programming environments:

You must install the drivers for your AlazarTech digitizer board on your computer to run the sample programs.

You should connect a 1 KHz, +/-500 mV signal (1 Vpp) to CH A of your digitizer before running the sample programs. If a digitizer requires a trigger input, the sample code configures it to trigger when a signal connected to CH A rises above 0V. If a trigger input is required but no trigger signal is supplied, the sample code will report an acquisition timeout error.

Change Log

This file lists all the important changes to ATS-SDK

[7.2.2] - 2018-09-26

Fixed

[7.2.1] - 2018-06-19

Fixed

Changed

[7.2.0] - 2018-03-26

Changed

Added

Fixed

[7.1.5] - 2016-08-10

Changed

Added

Removed

Fixed

[7.1.4] - 2016-01-08

Added

[7.1.3] - 2015-11-03

Changed

[7.1.2] - 2015-10-16

Added

[7.1.1] - 2015-10-6

Added

[7.1.0] - 2015-09-23

Added

Fixed

[7.0.0] - 2015-08-11

Added

Changed

[6.2.0] - 2015-03-02

Added

Changed

Removed

[6.1.0] - 2013-02-11

Added

Changed

Fixed

[6.0.4] - 2012-07-24

Added

Changed

[6.0.3] - 2011-06-16

Added

Changed

[6.0.2] - 2011-04-28

Changed

[6.0.1] - 2011-02-07

Added

Changed

[6.0.0] - 2011-01-24

Added

[5.8.4] - 2010-12-14

Added

Changed

[5.8.3] - 2010-08-18

Added

Changed

[5.8.2] - 2010-05-28

Changed

Fixed

[5.8.1] - 2010-05-12

Added

[5.8.0] - 2010-01-21

Added

Deprecated

Changed

[5.6.0] - 2008-06-01

Added