LOG IN

ATS9462: SyncBoard 4x

If your application requires more than 2 channels for data acquisition, you can synchronize multiple digitizers to allow truly synchronous sampling using a Master/Slave SyncBoard 9462.  SyncBoard 9462 is a mezzanine board that connects to the Master/Slave connector along the top edge of the ATS9462 and sits parallel to the motherboard.

SyncBoard-9462 4x allows a 2-, 3-, or 4-board Master/Slave system for up to 8 channels of data acquisition.

Request
Pricing
Application
Help
AlazarTech On
Google Scholar
Resources
 

Features

  • Enables up to 8 channels of data acquisition
  • Complete synchronization between Master board and all Slave boards
  • SyncBoard 9462 copies all clock and trigger signals and supplies them to all connected Slave boards
  • Allows the use of variable frequency clocks

Complete synchronization between Master board and all Slave boards

The Master board’s clock and trigger signals are copied by the SyncBoard 9462 and supplied to all the Slave boards.  This guarantees complete synchronization between the Master board and all Slave boards. SyncBoard 9462 allows the use of variable frequency clocks in Master/Slave configuration. A Master/Slave system samples all inputs simultaneously and also triggers simultaneously on the same clock edge.

For optimal trigger accuracy, only the Master board is allowed to trigger the acquisition system.